Blog Ubuntu, Linux, PC & Internet

Kalau di Ubuntu 7.04 dulu, setup untuk Wireless card (PC Card TypeII) NetGear WG511 (v1) adalah menggunakan Ndiswrapper. Semuanya berjalan dengan baik di notebook ThinkPad 240X yg kecil molek. Kali ni, saya nak test di notebook Panasonic CF-W2 pula yg menggunakan Ubuntu 8.04 Hardy Heron.

Sebaik saja masukkan PC Card NetGear WG511, lampu di card mula berkelip dan menyala, nampak cam OK je. Try tengok log :

dmesg | tail
[  969.562557] pccard: CardBus card inserted into slot 0
[  970.026963] PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
[  970.027451] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKG] -> GSI 10 (level, low) -> IRQ 10
[  970.027480] PCI: Setting latency timer of device 0000:02:00.0 to 64
[  970.134354] p54: LM86 firmware
[  970.134366] p54: FW rev 2.7.0.0 - Softmac protocol 4.1
[  971.058515] phy0: Selected rate control algorithm 'simple'
[  647.504760] phy0: hwaddr 00:09:5b:c6:fd:f7, isl3890
[  647.696775] ADDRCONF(NETDEV_UP): wlan0: link is not ready

Try click icon network kat panel atas kanan tu, wireless network access point dah nampak. Apa lagi cuma tinggal pilih je la yg mana sesuai, terus boleh sambung ke internet - memang canggih Ubuntu! Dah plug-n-play rupanya card ni.

Popularity: 64% [?]

This entry was posted on Tuesday, August 19th, 2008 at 6:21 am and is filed under PC & Internet, Ubuntu. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.